NEC ExpressA1160 - Manual (Page 49)

Partition Remote Console Interface
3-7
Powering off The cell is powering off.
Unknown The cell power state cannot be determined.
• Health and state (cell)
The possible values and icons of the health and state for cells are similar to those
for partitions. In addition, the state displays a second line containing additional
operating detail for each cell, as follows:
- In use; not in use
- Performing partitioning
- Updating firmware
- Running diagnostics
- Boot cell
- Will not be used in next boot
- Cannot be a boot cell
- Degraded
- In process of validation
- Mismatched manufacturer ID
- System serial number is incorrect
- Incompatible firmware level
- Has not been validated by system manager
- Memory mirroring enabled
- Memory mirroring: MEM0 broken; Memory mirroring: MEM1 broken
- Memory mirroring configuration error
• Command buttons for the following actions (refer to 3.5.2 Command Buttons for
command names and details):
- Powering up or down, including cycling power and doing a hard reset or force
dump
- Shutting down or rebooting the operating system
- Accessing the partition keyboard, video, mouse, and storage (KVMS) remotely
- Adding components to a running partition (hot-add components)
A tool tip describing the command is displayed when you point the cursor at a
button without clicking the mouse.