NEC ExpressA1160 - Manual (Page 112)

Updating BIOS Boot Order
5-6
Figure 5-2 BIOS Boot Manager
3. If you wish to select a boot device for this boot attempt, use the controls to select
the desired path, and then press Enter.
The boot process continues, using the selected device, and this procedure ends.
Note: This selection is in effect for this boot only and has no effect on the next boot.
4. If you did not select a boot device for this boot attempt, press Esc to return to the
BIOS front page, select Continue, and press Enter to continue the boot process
normally.
5.7. Updating BIOS Boot Order
The default BIOS boot order is identified in 5.2 BIOS Boot Order . Refer to 5.6 Viewing
and Temporarily Changing BIOS Boot Order for instructions on viewing the current boot
order for your system.