Customer data settings, Alert management – NEC ExpressA1160 User Manual
Page 64
Partition Remote Console Interface
3-22
Solutions Console.
3.5.13. Customer Data Settings
Customer data is not supported.
3.5.14. Alert
Management
An alert is a notification that an event occurred that requires attention. An event (refer to
3.5.5 Event Log
) is a condition that is detected (for example, by a sensor) and reported
to a monitoring entity. The condition can be a system error, a change in an
environmental condition, a system resource that is outside currently accepted limits, or
some other system status that is no longer within specification.
Figure 3-13
shows the partition alert management page.
Figure 3-13 Alert Management Page
Management firmware generates alerts when certain events occur in a partition. Alerts
can be
messages
If you configure e-mail alerts, you must configure the Simple Mail Transfer Protocol
(SMTP) server.
• SNMP
traps