NEC ExpressA1160 - Manual (Page 95)

Menu System
4-9
- Reference to documentation
- Return to main menu
• System
- View information
o
System name
o
System serial number
o
System size (number of cells)
- Return to main menu
• Partition
- View information
o
Partition name
o
Membership (which means the cells that are in the partition, in the form
xxxx for cells 0 through 3. For example, x1xx means that cell 1 is a
member but cells 0, 2, and 3 are not.)
o
Flags for TPM Physically Present, maintenance mode, and No Degraded
Boot
- View GUID
- Chassis control (refer to 3.5.2 Command Buttons )
o
Power up/down
o
Power cycle
o
Soft shutdown
o
Hard reset
o
Force dump (send a nonmaskable interrupt (NMI))
- Network (refer to the full description that follows)
- Set Phys Present (TPM Physically Present)
- Set maint mode (maintenance mode)
- Clear all faults
- Return to main menu
• Cell
- View information
o
Cell ID and power state
o
Cell serial number