NEC ExpressA1160 - Manual (Page 119)

Configuring Settings for Partition Options
5-13
Figure 5-9 BIOS Security Window
8. Press Esc to exit the BIOS Setup and return to the BIOS front page.
9. Select Continue and press Enter to continue the partition boot process using the
new BIOS settings.
5.9. Configuring Settings for Partition Options
You can configure settings for partition options by selecting Partition from the BIOS
Setup page. Refer to
5.8 Configuring BIOS Settings for the procedure. Refer to 5.10
Operating System Settings in BIOS for the BIOS default values for operating systems.
1. To configure options for the operating system boot process, select OS Control and
press Enter.
The OS Control window appears, as shown in Figure 5-10 . Use the controls to set
the values as desired for each option, then press F10 to save the changes.