Raritan Computer DOMINION KSX II - Manual (Page 115)

Chapter 6: USB Profiles
105
CIM Compatibility
In order to make use of USB profiles, you must use a D2CIM-VUSB or
D2CIM-DVUSB with updated firmware. A VM-CIM that has not had its
firmware upgraded will support a broad range of configurations
(Keyboard, Mouse, CD-ROM, and Removable Drive) but will not be able
to make use of profiles optimized for particular target configurations.
Given this, existing VM-CIMs should be upgraded with latest firmware in
order to access USB profiles. Until existing VM-CIMs are upgraded, they
will be able to provide functionality eq
uivalent to the „Generic‟ profile.
VM-CIM firmware is automatically upgraded during a KSX II firmware
upgrade, but VM-CIMs that have not had their firmware upgraded can be
upgraded as described in
Upgrading CIMs (on page 212).
See Computer Interface Modules (CIM) Specifications (see
" Computer Interface Modules (CIMs) " on page 275) for additional
information.
Available USB Profiles
The current release of the KSX II comes with the selection of USB
profiles described in the following table. New profiles are included with
each firmware upgrade provided by Raritan. As new profiles are added,
they will be documented in the help.
USB profile Description
BIOS Dell ® PowerEdge ®
1950/2950/2970/6950/R200
Dell PowerEdge
1950/2950/2970/6950/R200 BIOS
Use either this profile or 'Generic'
profile for Dell PowerEdge
1950/2950/2970/6950/R200 BIOS.
Restrictions:

None
BIOS Dell OptiPlex ™
Keyboard Only
Dell OptiPlex BIOS Access (Keyboard
Only)
Use this profile to have keyboard
functionality for the Dell OptiPlex BIOS
when using D2CIM-VUSB. When using
the new D2CIM-DVUSB, use 'Generic'
profile.
Notice:

Optiplex 210L/280/745/GX620
requires D2CIM-DVUSB with
'Generic' profile to support virtual
media