Raritan Computer DOMINION KSX II - Manual (Page 135)

Chapter 7: User Management
125
9. In the User Search DN field, enter the Distinguished Name of where
in the LDAP database you want to begin searching for user
information. Up to 64 characters can be used. An example base
search value might be: cn=Users,dc=raritan,dc=com. Consult
your authentication server administrator for the appropriate values to
enter into these fields.
10. Enter the Distinguished Name of the Administrative User in the DN of
Administrative User field (up to 64 characters). Complete this field if
your LDAP server only allows administrators to search user
information using the Administrative User role. Consult your
authentication server administrator for the appropriate values to type
into this field. An example DN of Administrative User value might be:
cn=Administrator,cn=Users,dc=testradius,dc=com.
Optional
11. In the Dialback Query String field, type the dialback query string.
Optional
If you are using Microsoft Active Directory, you must enter the
following string: msRADIUSCallbackNumber. If you are not using
Microsoft Active Directory, use the attribute string defined for that
LDAP server.
Note: This string is case sensitive.
12. If you entered a Distinguished Name for the Administrative User, you
must enter the password that will be used to authenticate the
Administrative User's DN against the remote authentication server.
Enter the password in the Secret Phrase field and again in the
Confirm Secret Phrase field (up to 128 characters).
LDAP/Secure LDAP