Raritan Computer DOMINION KSX II - Manual (Page 170)

Chapter 8: Device Management
160
To remove a rack PDU association:
1. Select the appropriate rack PDU from the Power Strip Name
drop-down list.
2. For that rack PDU, select the appropriate outlet from the Outlet
Name drop-down list.
3. From the Outlet Name drop-down list, select None.
4. Click OK. The rack PDU/outlet association is removed and a
confirmation message is displayed.
Target Settings
To define target settings:
1. In the Target Settings section, select 720x400 Compensation if you
are experiencing display issues when the target is using this
resolution.
2. Select 'Use international keyboard for scan code set 3' if connecting
to the target with a DCIM-PS2 and require the use of scan code set 3
with an international keyboard.