Raritan Computer DOMINION KSX II - Manual (Page 188)

Chapter 8: Device Management
178
Blade chassis Connection method Recommended CIM(s)
Management Module.
Source: IBM BladeCenter Products and
Technology
IBM BladeCenter E The current model BladeCenter E
chassis (8677-3Rx) ships standard with
one Advanced Management Module.
Source: IBM BladeCenter Products and
Technology

DCIM-USBG2

D2CIM-DVUSB
IBM BladeCenter T The BladeCenter T chassis ships
standard with one Advanced
Management Module.
In contrast to the standard BladeCenter
chassis, the KVM module and the
Management Module in the
BladeCenter T chassis are separate
components. The front of the
Management Module only features the
LEDs for displaying status. All Ethernet
and KVM connections are fed through
to the rear to the LAN and KVM
modules.
The KVM module is a hot swap module
at the rear of the chassis providing two
PS/2 connectors for keyboard and
mouse, a systems-status panel, and a
HD-15 video connector.
Source: IBM BladeCenter Products and
Technology

DCIM-PS2
IBM BladeCenter HT The BladeCenter HT chassis ships
standard with one Advanced
Management Module. This module
provides the ability to manage the
chassis as well as providing the local
KVM function.
Source: IBM BladeCenter Products and
Technology

DCIM-USBG2
Note: In order to support Auto-discovery, IBM BladeCenter Models H and
E must use AMM with firmware version BPET36K or later.
Note: In the case of IBM Blade Center Models E and H, the KSX II only
supports auto-discovery for AMM[1] as the acting primary management
module.