Raritan Computer DOMINION KSX II - Manual (Page 195)

Chapter 8: Device Management
185
a. Select the Power Save Mode checkbox.
b. Set the amount of time (in minutes) in which Power Save Mode
will be initiated.
8. Choose the resolution for the KSX II Local Console from the
drop-down list. The browser will be restarted when this change is
made.
 800x600
 1024x768
 1280x1024
9. Choose the refresh rate from the drop-down list. The browser will be
restarted when this change is made.
 60 Hz
 75 Hz
10. Choose the type of local user authentication.
 Local/LDAP/RADIUS. This is the recommended option. For more
information about authentication, see Remote Authentication
(on page 34).
 None. There is no authentication for Local Console access. This
option is recommended for secure environments only.
 Select the "Ignore CC managed mode on local port" checkbox if
you would like local user access to the KSX II even when the
device is under CC-SG management.
Note: If you initially choose not to ignore CC Manage mode on the
local port but later want local port access, you will have to remove
the device from under CC-SG management (from within CC-SG).
You will then be able to check this checkbox.
11. Click OK.