Raritan Computer DOMINION KSX II - Manual (Page 247)

Chapter 12: Command Line Interface (CLI)
237
Port Sharing Using CLI
It is possible for access client users to share ports with other
authenticated and authorized users, regardless of whether they are
access client users (RSC) or SSH/Telnet users. Port sharing is used for
training or for troubleshooting applications.

Users are notified in real time if they have Write access or
Read-Only access at any point during the port-sharing session.

Users who have Write permissions can request Write access to a
port.
Administering the KSX II Console Server Configuration Commands
Note: CLI commands are the same for SSH, Telnet, and Local Port
access sessions.
The Network command can be accessed in the Configuration menu for
the KSX II.
Configuring Network
The network menu commands are used to configure the KSX II network
adapter.
Commands Description
interface Configure the KSX II device network interface.
name Network name configuration
ipv6 Set/get IPv6 network parameters.