Raritan Computer DOMINION KSX II - Manual (Page 125)

Chapter 7: User Management
115
The Group page is organized into the following categories: Group,
Permissions, Port Permissions, and IP ACL.
2. Type a descriptive name for the new user group into the Group
Name field (up to 64 characters).
3. Set the permissions for the group. Select the checkboxes before the
permissions you want to assign to all of the users belonging to this
group. See
Permissions (on page 116).
4. Set the port permissions. Specify the server ports that can be
accessed by users belonging to this group (and the type of access).
See
Port Permissions (on page 117).
5. Set the IP ACL. This feature limits access to the KSX II device by
specifying IP addresses. It applies only to users belonging to a
specific group, unlike the IP Access Control list feature that applies
to all access attempts to the device (and takes priority). See
Group-Based IP ACL (Access Control List) (on page 118).
6. Click OK.
Note: Several administrative functions are available within MPC and from
the KSX II Local Console. These functions are available only to members
of the default Admin group.
Note: Both IPv4 and IPv6 addresses are supported.
Setting Permissions for an Individual Group
To set permissions for an individual user group:
1. Locate the group from among the groups listed. Individual groups
can be identified by the @ in the Group Name.
2. Click the Group Name. The Group page opens.