Raritan Computer DOMINION KSX II - Manual (Page 187)

Chapter 8: Device Management
177
Blade chassis Connection method Recommended CIM(s)
custom cable provided with the system).
Source: Dell PowerEdge 1955 Owner's
Manual
Dell PowerEdge
M1000e The KVM Switch Module (iKVM) is
Integrated with this chassis.
The iKVM is compatible with the
following peripherals:

USB keyboards, USB pointing
devices

VGA monitors with DDC support.
Source: Dell Chassis Management
Controller, Firmware Version 1.0, User
Guide

DCIM-USBG2
HP ® BladeSystem
c3000
The HP c-Class Blade SUV Cable
enables you to perform blade chassis
administration, configuration, and
diagnostic procedures by connecting
video and USB devices directly to the
server blade.
Source: HP Proliant ™ BL480c Server
Blade Maintenance and Service Guide

DCIM-USBG2

D2CIM-VUSB

D2CIM-DVUSB (for
standard KVM port
operation without a
KVM option)
HP BladeSystem
c7000 The HP c-Class Blade SUV Cable
enables you to perform server blade
administration, configuration, and
diagnostic procedures by connecting
video and USB devices directly to the
server blade.
Source: HP ProLiant BL480c Server
Blade Maintenance and Service Guide

DCIM-USBG2

D2CIM-VUSB

D2CIM-DVUSB (for
standard KVM port
operation)
IBM ® BladeCenter ® S The Advanced Management Module
(AMM) provides system management
functions and keyboard/video/mouse
(KVM) multiplexing for all blade chassis.
The AMM connections include: a serial
port, video connection, remote
management port (Ethernet), and two
USB v2.0 ports for a keyboard and
mouse.
Source: Implementing the IBM
BladeCenter S Chassis

DCIM-USBG2
IBM BladeCenter H The BladeCenter H chassis ships
standard with one Advanced

DCIM-USBG2

D2CIM-DVUSB