Raritan Computer DOMINION KSX II - Manual (Page 126)

Chapter 7: User Management
116
3. Select the appropriate permissions.
4. Click OK.
Note: See Alternate RADIUS Authentication Settings for information on
additional settings if you are using Alternate RADIUS Authentication.
Permissions
Important: Selecting the User Management checkbox allows the
members of the group to change the permissions of all users,
including their own. Carefully consider granting these permissions.
Permission Description
Device Access
While Under
CC-SG
Management Allows users and user groups with this
permission to directly access the KSX II using
an IP address when Local Access is enabled
for the device in CC-SG. The device can be
accessed from the Local Console, Remote
Console, MPC, VKC, and AKC.
When a device is accessed directly while it is
under CC-SG management, access and
connection activity is logged on the KSX II.
User authentication is performed based on KSX
II authentication settings.
Note: The Admin user group has this
permission by default.
Device Settings Network settings, date/time settings, port
configuration (channel names, power
associations), event management (SNMP,
Syslog), virtual media file server setup
Diagnostics Network interface status, network statistics,
ping host, trace route to host, KSX II
diagnostics
Maintenance Backup and restore database, firmware
upgrade, factory reset, reboot
Modem Access Permission to use the modem to connect to the
KSX II device
PC-Share Simultaneous access to the same target by
multiple users
Security SSL certificate, security settings (VM Share,
PC-Share), IP ACL
User User and group management, remote