Raritan Computer DOMINION KSX II - Manual (Page 36)

Chapter 2: Installation and Configuration
26
4. Connect the rack PDU to an AC power source.
5. Power on the KSX II device.
Important: When using CC-SG, the power ports should be inactive
before attaching rack PDUs that were swapped between the power
ports. If this is not done, there is a possibility that the number of
power outlets will not be correctly detected, especially after
swapping 8 and 20 outlet rack PDU models.
Diagram key
KSX II PX serial port
KSX II Power
Ctrl. 1 Port or
Power Ctrl. 2
Port Cat5 cable
PX