Raritan Computer DOMINION KSX II - Manual (Page 37)

Chapter 2: Installation and Configuration
27
F. Serial Target Ports
To connect a serial target to the KSX II, use a Cat5 cable with an
appropriate serial adapter.
The following table lists the necessary KSX II hardware (adapters and/or
cables) for connecting the KSX II to common vendor/model
combinations.
Vendor Device Console
connector Serial
connection
Checkpoint Firewall DB9M ASCSDB9F
adapter and a
CAT 5 cable
Cisco PIX Firewall
Cisco Catalyst RJ-45 CRLVR-15
rollover cable; or
CRLVR-1
adapter cable
and a CAT5
cable
CRLVR-1 cable
for connecting a
terminal port
(RJ-45 Connector
type) of KSX II-48
models that have
this connector to
another KSX II.
Cisco Router DB25F ASCSDB25M
adapter and a
CAT 5 cable
Hewlett
Packard
®
UNIX ® Server DB9M ASCSDB9F
adapter and a
CAT 5 cable
Silicon
Graphics Origin
Sun ™ SPARCStation DB25F ASCSDB25M
adapter and a
CAT 5 cable
Sun Netra T1 RJ-45 CRLVR-15 cable;
or CRLVR-1
adapter and a
CAT5 cable
Sun Cobalt DB9M ASCSDB9F
adapter and a
CAT 5 cable
Various Windows NT ®