Raritan Computer DOMINION KSX II - Manual (Page 266)

Chapter 13: KSX II Local Console
256
Resetting the KSX II Using the Reset Button
On the back panel of the device, there is a Reset button. It is recessed to
prevent accidental resets (you will need a pointed object to press this
button).
The actions that are performed when the Reset button is pressed are
defined in the graphical user interface. See Encryption & Share.
Note: It is recommended that you save the audit log prior to performing a
factory reset. The audit log is deleted when a factory reset is performed
and the reset event is not logged on the audit log. For more information
about saving the audit log, see
Audit Log (on page 206).
To reset the device:
1. Power off the KSX II.
2. Use a pointed object to press and hold the Reset button.
3. While continuing to hold the Reset button, power the KSX II device
back on.
4. Continue holding the Reset button for 10 seconds.
Once the device has been reset, two short beeps signal its completion.