Raritan Computer DOMINION KSX II - Manual (Page 163)

Chapter 8: Device Management
153
SNMP Trap Configuration
SNMP provides the ability to send traps, or notifications, to advise an
administrator when one or more conditions have been met. The following
table lists the KSX II SNMP traps:
Trap name Description
cimConnected A CIM is plugged into to the KSX II port.
cimDisconnected A CIM is either unplugged from the KSX
II port or powered-off.
cimUpdateCompleted CIM firmware update process
completed.
cimUpdateStarted CIM firmware update process started.
configBackup The device configuration has been
backed up.
configRestore The device configuration has been
restored.
deviceUpdateFailed Device update has failed.
deviceUpgradeCompleted The KSX II has completed update via
an RFP file.
deviceUpgradeStarted The KSX II has begun update via an
RFP file.
ethernetFailover An Ethernet failover was detected and
restored on a new Ethernet interface.
factoryReset The device has been reset to factory
defaults.
firmwareFileDiscarded Firmware file was discarded.
firmwareUpdateFailed Firmware update failed.
firmwareValidationFailed Firmware validation failed.
groupAdded A group has been added to the KSX II
system.
groupDeleted A group has been deleted from the
system.
groupModified A group has been modified.
ipConflictDetected An IP Address conflict was detected.
ipConflictResolved An IP Address conflict was resolved.
networkFailure An Ethernet interface of the product can
no longer communicate over the