Raritan Computer DOMINION KSX II - Manual (Page 194)

Chapter 8: Device Management
184
 German (Germany)
 JIS (Japanese Industry Standard)
 Simplified Chinese
 Traditional Chinese
 Dubeolsik Hangul (Korean)
 German (Switzerland)
 Portuguese (Portugal)
 Norwegian (Norway)
 Swedish (Sweden)
 Danish (Denmark)
 Belgian (Belgium)
Note: Keyboard use for Chinese, Japanese, and Korean is for
display only. Local language input is not supported at this time for
KSX II Local Console functions.
4. Choose the local port hotkey. The local port hotkey is used to return
to the KSX II Local Console interface when a target server interface
is being viewed. The default is to Double Click Scroll Lock, but you
can select any key combination from the drop-down list:
Hot key: Take this action:
Double Click Scroll Lock Press Scroll Lock key twice quickly
Double Click Num Lock Press Num Lock key twice quickly
Double Click Caps Lock Press Caps Lock key twice quickly
Double Click Left Alt key Press the left Alt key twice quickly
Double Click Left Shift key Press the left Shift key twice quickly
Double Click Left Ctrl key Press the left Ctrl key twice quickly
5. Select the Local Port Connect key. Use a connect key sequence to
connect to a target and switch to another target. You can then use
the hot key to disconnect from the target and return to the local port
GUI. The connect key works for both standard servers and blade
chassis. Once the local port connect key is created, it will appear in
the Navigation panel of the GUI so you can use it as a reference.
See
Connect Key Examples (on page 248) for examples of connect
key sequences.
6. Set the Video Switching Delay from between 0 - 5 seconds, if
necessary. Generally 0 is used unless more time is needed (certain
monitors require more time to switch the video).
7. If you would like to use the power save feature.