Raritan Computer DOMINION KSX II - Manual (Page 265)

Chapter 13: KSX II Local Console
255
KSX II Local Console Factory Reset
Note: This feature is available only on the KSX II Local Console.
The KSX II offers several types of reset modes from the Local Console
user interface.
Note: It is recommended that you save the audit log prior to performing a
factory reset. The audit log is deleted when a factory reset is performed
and the reset event is not logged in the audit log. For more information
about saving the audit log, see Audit Log (on page 206).
To perform a factory reset:
1. Choose Maintenance > Factory Reset. The Factory Reset page
opens.
2. Choose the appropriate reset option from the following options:

Full Factory Reset - Removes the entire configuration and resets the
device completely to the factory defaults. Note that any management
associations with CommandCenter will be broken. Because of the
complete nature of this reset, you will be prompted to confirm the
factory reset.

Network Parameter Reset - Resets the network parameters of the
device back to the default values (click Device Settings > Network
Settings to access this information):
 IP auto configuration
 IP address
 Subnet mask
 Gateway IP address
 Primary DNS server IP address
 Secondary DNS server IP address
 Discovery port
 Bandwidth limit
 LAN interface speed & duplex
 Enable automatic failover
 Ping interval (seconds)
 Timeout (seconds)
1. Click Reset to continue. You will be prompted to confirm the factory
reset because all network settings will be permanently lost.
2. Click OK button proceed. Upon completion, the KSX II device is
automatically restarted.