Ricoh 4016 Series User Manual
Page 109
T
ROUBLESHOOTING
8.12
MEMORY FULL
The memory is full.
Either delete unnecessary
documents, retransmit after more
memory becomes available, or
split the transmission into more
than one operation.
NO ANSWER
The remote fax machine
has not answered after
several redial attempts.
Try again. Make sure the remote
machine is operational.
POLLING ERROR
The remote fax machine
you want to poll is not
ready to respond to your
poll.
Or, when setting up to
poll another fax
machine, you have used
an incorrect poll code.
The remote operator should know
in advance that you are polling
and have the fax machine loaded
with the original document.
Enter the correct poll code.
NO DEVELOPER
CARTRIDGE
The drum cartridge is not
installed.
Install the drum cartridge.
NO PAPER
The paper in the paper
Tray has run out.
Load paper in the paper Tray.
RX TRAY FULL
Paper is overstacked in
the output bin.
Remove paper.
PAPER JAM 0
Paper has jammed in the
paper feeding area of the
Tray.
PAPER JAM 1
Paper has jammed in the
fuser area.
PAPER JAM 2
Paper has jammed in the
paper exit area.
RETRY REDIAL?
The machine is waiting
for a specified time
interval to redial a
previously busy station.
You can press Mode/Enter to
immediately redial, or Clear/
Stop
to cancel the redial
operation.
SCANNER LOCKED
The scan module is
locked.
Unlock the scanner (see
page 1.2) and press Clear/
Stop
.
Display
Meaning
Solution