Ricoh 4016 Series User Manual
Page 95
M
AINTENANCE
7.10
5
Reinstall the toner cartridge, and then lock the lever.
N
OTE
:
If your machine automatically recognises the replaced
cartridge, you can skip steps 6 and 7.
6
Close the front cover and the side cover. The LCD displays
“NEW DRUM? 1.YES 2.NO”.
7
Select “YES” by pressing 1. The machine returns to Standby
mode.
If the drum cartridge does not work properly and you have to
replace it with a new one before “DRUM WARNING” or “DRUM
EMPTY” may appears on the display, replace the drum cartridge
as described above then take the following steps to reset the
drum counter:
1
Press Menu/Exit then Maintenance from the one-touch
dial keypad.
2
Use
or
until “NEW DRUM” appears on the bottom line
of the display, and press Mode/Enter.
3
“NEW DRUM UNIT?” appears on the top line and “1.YES
2.NO” appears on the bottom line. Press 1 to select “1.YES.”
N
OTE
:
If you do not reset the counter, “DRUM WARNING” or
“DRUM ENPTY” may appear before the current drum cartridge’s
time is up.