Ricoh 4016 Series - Manual (Page 30)

G ETTING STARTED 1.19
1
Tray Setting the Paper Size
After loading paper in the paper Tray, you need to set the paper
size using the control panel buttons. These settings will apply to
the Copy mode only. In the PC printing mode, you have to select
the paper size in the application program you use.
1 Press Menu/Exit and then System Data from the one-
touch dial keypad.
The display shows “CASSETTE PAPER” on the top line and
the available options on the bottom line.
2 Use or to find the paper size you are using, and press
Mode/Enter to save the selection.
You can press the corresponding number shown on the
display to select the paper size.
3 To return to Standby mode, press Clear/Stop.
Changing the Display Language
To change the language that is displayed on the LCD display,
take the following steps:
1 Press Menu/Exit and then System Setup from the one-
touch dial keypad.
2 Press or until “SELECT LANGUAGE” appears on the top
line of the display. The current setting appears on the
bottom line of the display.
3 Press or until you see the language you want on the
display.
4 Press Mode/Enter to save the selection.
5 To return to Standby mode, press Clear/Stop.