Ricoh 4016 Series - Manual (Page 41)

P APER H ANDLING 3.4
• Store unused media at temperatures between 59 o F and 86 o F
(15 o C to 30 o C). The relative humidity should be between 10%
and 70%.
• Do not load more than 10 sheets of special media into the
Bypass Tray at a time.
• Verify that your labels’ adhesive material can tolerate fusing
temperature of 200 o C (392 o F) for 0.1 second.
• Make sure that there is no exposed adhesive material
between labels. Exposed areas can cause labels to peel off
during printing, which can cause paper jams. Exposed
adhesive can also cause damage to machine components.
• Do not feed a sheet of labels through the machine more than
once. The adhesive backing is designed for one pass through
the machine.
• Do not use labels that are separating from the backing sheet
or are wrinkled, bubbled, or otherwise damaged.
TrayLoading Paper in the Tray
The paper Tray can hold a maximum of 550 sheets of 20lb(75g)
plain paper. For copying or faxing, you can use A4-, letter-, or
legal-size paper only.
To load paper, pull open the paper Tray and place paper with the
side you want to print facing up.