Ricoh 170 / 180 - Manual (Page 17)

Most procedures start from standby mode as shown in the display. The Type I
model has two types of standby display and the Type II model has one type of
display. The percentage number shows how much memory spacing is remaining.
MEM.TX
indicates that the machine is in Memory Transmission mode. If you
start a procedure and do not enter anything at the operation panel for more than 1
minute, the machine returns to standby mode. You can select different time spans
after which the machine automatically returns to standby mode. If you want to
change this, contact your service representative.
TYPE I Models
❐ Immediate Transmission mode READY 100% 10:00AM
SET DOC. OR DIAL NO.
❐ Memory Transmission mode MEM.TX 100% 10:00AM
SET DOC. OR DIAL NO.
TYPE II Models
READY 10:00AM
SET DOC. OR DIAL NO.
Symbols
The text contains two symbols that highlight important points or direct you
towards other parts of the manual that are related to the feature currently being
described.
Indicates a hint (for example a page number where related information can
be found).
Indicates that you can switch the current feature on or off using Function 62
or Function 63. Some features must be switched on before they will work.
MANUAL CONVENTIONS
6