Ricoh 170 / 180 - Manual (Page 35)

Cutting the Leading Edge of The Paper
In situations where the machine is not copying or receiving messages very often,
the edge of the paper roll may curl. If this feature is on, the machine will
automatically cut off the curled part before receiving or copying.
The machine will cut the leading edge of the paper if a message is not received or
a copy made for more than 24 hours. If you wish to change this period, contact
your service representative.
1. Press the Function key and
6,2,2,2,2,6,3 using the ten keypad, then
press the Yes key.
SETTING? Y/j
PRINT LIST j
❐
At this time, you can print the user parameter list,
press the
j key then press the Yes key.
2. Press the Yes key. Press the
k
key until
the settings for switch 13 are displayed.
KPAD/Y/j k
SWITCH 13:0000 0000
3. Change the setting of digit 7. KPAD/Y/j k
SWITCH 13:1000 0000
4. If you wish to change the setting, press
7 using the ten keypad.
5. Press the Yes key, then press the Func-
tion key.
Digit 7
0: The curled edge is not cut automatically.
1: The curled edge is cut automatically
SOME ITEMS MUST BE PROGRAMMED FIRST
24