Ricoh 170 / 180 - Manual (Page 98)

4. If you wish to change the setting, press
the appropriate key on the keypad.
KPAD/Y/j k
SWITCH 03:0000 0000
6. Finish: Press the Yes key, then press the Function key.
NOTE: To switch the Error Report on or off, contact a service technician.
PRINTING A SAMPLE OF DATA ON THE REPORTS
This feature is only available on the Type I model.
For reference purposes, the machine can print the first few inches of the fax
message on the following reports:
❐ Communication Result Report
❐ File Reserve Report
❐ Communication Failure Report
❐ Polling Clear Report
The procedure to switch this feature on or off is as follows (see page 103 if you
need more information about the User Parameter settings adjustment procedure):
1. Press the Function key and
6,2,2,2,2,6,3, using the ten keypad, then
press the Yes key.
SETTING? Y/j
PRINT LIST j
2. Press the Yes key. The settings for
switch 00 are now displayed.
KPAD/Y/j k
SWITCH 00:0000 0000
3. Press the
j
key until the settings for
Switch 04 are displayed.
KPAD/Y/j k
SWITCH 04:0000 0000
4. The setting that you need to change is
digit 7. If you wish to change the setting,
press 7 using the ten keypad.
KPAD/Y/j k
SWITCH 04:1000 0000
6. Finish: Press the Yes key, then press
the Function key.
RE
POR
T
S
digit 7 6 5 4 3 2 0
Digit 7
0: This feature is Off
1: This feature is On
PRINTING A SAMPLE OF DATA ON THE REPORTS
87