Ricoh 170 / 180 - Manual (Page 91)

3. If you wish to switch something on or off,
press the Yes key, then use the
j
and
the
k
keys until the displayed setting is
correct.
SET OPTION Y/j k
kON OFF
4. Finish : Press the Yes key.
Picking up Messages Stored Elsewhere (Polling Reception)
Use this feature when you wish to poll a message from another terminal. You can
poll documents from many terminals with only one operation (use Groups to make
the most out of this feature).
You have three options: Free Polling, Secured Polling and Stored ID Override, as
described for Polling Transmission (see page 77).
The maximum number of terminals that you can poll in one operation is 10 for
Type I Models and 1 for Type II Models .
Cross-references Groups: see page 31.
Procedure
1. Press the Function key and 1,1 using
the ten keypad, then press the Yes key.
POLLING RECV OPTIONk
DIAL FAX NUMBER
2. Dial the number(s) and press the Yes
key.
POLLING RECV Y/START
3104719266
3. Press the Start key.
Stored ID Override Option
This procedure overrides the ID Code that is stored in your machine. The override
is effective for this operation only.
1. Press the Function key and 1,1 using
the ten keypad, then press the Yes key.
POLLING RECV OPTIONk
DIAL FAX NUMBER
Message Receiver
Message Transmitter
Message Transmitter
Message Transmitter
For how to use other options, such as Send
Later for delayed polling, see page 82.
OTHER
80