Installing the machine, Location, Installation – Ricoh 170 / 180 User Manual

Page 24

Advertising
background image

INSTALLING THE MACHINE

LOCATION

For the best possible performance, install your machine in a place which satisfies
the following conditions.

❐

Not exposed to direct sunlight

❐

Well ventilated (air turnover at least three times per
hour).

❐

Level

❐

Not subject to vibration

❐

Away from other electronic equipment, to avoid
interference

❐

Away from areas containing corrosive gas.

❐

Dust-free

❐

Condensation-free

❐

Temperature 17 to 28°C[63 to 82 °F]

❐

Humidity 40 to 70%RH (do not install near a
humidifier)

❐

Away from heaters and air conditioners, to avoid
sudden changes of temperature

❐

Within 2m (2.2 yards) of a three-pin grounded power outlet

❐

With the clearance as shown on the right

NOTE: If you wish to receive legal size messages or copy the legal size docu-

ments, you must allow 8" (20cm) clearance at the back of the machine.

INSTALLATION

CAUTION:Do not plug it in until everything is connected properly.
When moving the machine, first disconnect the telephone line, then the power
cord.

NOTE : Before doing the installation procedure, check the contents of the box . In

some models, some of the accessories have already been installed.

❐

Fax Machine

❐

Paper Roll

❐

Document Table

❐

Copy tray

❐

Operation Manual

❐

Handset

❐

Telephone Cord

❐

Quick Dial Sheet

❐

Modular Cord

❐

Paper Guide

❐

Paper Holder Rod

INS

T

A

LL

ING

THE

M

A

CHINE

8" (20cm)

4" (10cm)

4" (10cm)

13

Advertising