Ricoh 170 / 180 - Manual (Page 68)

Using the Handset
Using the fax machine’s built-in handset, you can use the fax machine in the
same way as a normal telephone. Pick up the handset and dial on the fax
machine’s ten keypad (or use a Quick Dial key or a Speed Dial Code if you wish).
1. Pick up the handset.
2. Dial.
NOTE: Do not press the Start key.
3. Continue as for a normal telephone conversation.
Using the Redial Key
Use Redial Key if you wish to redial a number that you dialed correctly.
1. Press the Pause/Redial key, until the
required number appears in the display,
then press Yes key.
REDIAL Y/j k
n 08 ATLANTA OFFICE
2. Press the Start key. The number will be
dialed immediately.
Answering the Telephone
If the telephone rings just once: A fax is coming in. Do not pick up the handset.
If the telephone rings continuously:
1. Pick up the handset and speak to the other party. If you hear a high-pitched
tone, a fax is coming in. Press the Start key then hang up.
2. If the caller wants to send you a fax, press the Start key after speaking. Then
hang up. If nothing happens after you press the Start key, the power may be
switched off or the telephone may not be connected correctly.
To Talk Before Sending a Fax (On Hook Dial)
1. Press the On Hook Dial key
2. Dial.
NOTE: Do not use the handset and do not press the Start key.
3. If you hear a voice from the machine’s built-in speaker, pick up the handset
and speak to the other party.
❐
If you hear a high-pitched tone instead of a voice, place your fax message in the feeder,
then press the Start key.
4. When you are ready to send your fax message, place your message in the
feeder, then ask the other party to press the Start key.
5. When you hear a high pitched tone, press the Start key.
B
A
S
IC OPERA
T
IO
N
MAKING TELEPHONE CALLS
57