Quadra-Fire EDGE 60 ZERO CLEARANCE PELLET FIREPLACE 7051-158B - Manual (Page 49)

R
December 6, 2011 7051-158B Page 49
EDGE 60 Pellet Fireplace
Installing Front onto Mounting Frame
B. Front - Installation
Front
Mounting
Frame
Included in Kit: Front, mounting frame, masonry spacer,
fasteners and glove
Tools Required: Phillips Head screwdriver
Installing Mounting Bracket on Fireplace
1. Use a Phillips Head screwdriver and attach the mount-
ing frame to the face of the fi replace with 5 screws on
the top and bottom and 4 on each side. Figure 48.1
2. The front is attached to the mounting frame via the
hinges.
3. All 4 fronts are mounted the same way.
Figure 48.1
Hinge on Fireplace
Hinge on Front
Start with Bottom Hinge
Alignment and then Top
Hinges Aligned
Push Up on
Spring Loaded
Hinge Pin
Locking Tab
Push Locking Tab into
Place to Hold Hinge Pin
Figure 48.2
Figure 48.3
Figure 48.4
Figure 48.5
CAUTION! BURN HAZARD. Allow the front to cool
before touching. Do NOT touch without wearing protective
glove.