Toshiba CARRIER RAS-15LKV-UL User Manual

Page 70

Advertising
background image

70

11-4. Self-Diagnosis by Remote Controller (Check Code)

1. If the lamps are indicated as shown B to E in Table 11-3-1, execute the self-diagnosis by the remote controller.

2. When the remote controller is set to the service mode, the indoor controller diagnoses the operation

condition and indicates the information of the self-diagnosis on the display of the remote controller with the
check codes.

If a fault is detected, all lamps on the indoor unit will flash at 5 Hz and it will beep for 10 seconds
(Beep, Beep, Beep ... ). The timer lamp usually flashes (5 Hz) during self-diagnosis.

11-4-1. How to Use Remote Controller in Service Mode

Fig. 11-4-1

TEMP

PRESET

ONE-TOUCH

QUIET

SWING

TIMER

ON

FILTER

CHK

CLOCK

OFF

CLR

SLEEP

SET

FIX

Hi-POWER

ECO

COMFORT

SLEEP

MODE

TEMP

FAN

Push [CHECK] button with a tip of pencil to set the
remote controller to the service mode.

• “ ” is indicated on the display of the remote controller.

Push [ON ] or [OFF ] button
If there is no fault with a code, the indoor unit will beep
once (Beep) and the display of the remote controller will
change as follows :

• The TIMER indicator of the indoor unit flashes continuously.
(5 times per 1 sec.)

• Check the unit with all 52 check codes ( to )
as shown in Table 11-4-1.

• Push [ON ] or [OFF ] button to change the check code
backward.

If there is a fault, the indoor unit will beep for 10 seconds
(Beep, Beep, Beep ... ).

Note the check code on the display of the remote controller.

• 2-digits alphanumeric will be indicated on the display.

• All indicators on the indoor unit will flash.
(5 times per 1 sec.)

Push [CLR] button.
After service finish for clear service code in memory.

• “7F” is indicated on the display of the remote controller.

Push [

] button to release the service mode.

• The display of the remote controller returns to as it was
before service mode was engaged.

1

2

3

4

Alphanumeric characters are
used for the check codes.

is 5.

is 6.

is A.

is B.

is C.

is D.

• • •

FILE NO. SVM-10020

°C/° F

Advertising