Thermador PROFESSIONAL PRD48 - Manual (Page 17)

English 12
Using The Cooktop
Sealed Star ® Burners
The cooktop features four or six gas surface Star
®
burners;
the right-front Star
®
Burner is rated at 22,000 BTU/HR
(18,000 BTU/HR using Propane) and all other Star
®
burners are rated at 18,000 BTU/HR (15,000 BTU/ HR
using Propane).
Each burner has a unique QuickClean TM Base feature
which allows the burner and area around the burner to be
easier to clean.
On all models, the two left and two right burners have the
exclusive ExtraLow
®
feature, any remaining burners are
Standard. Each Star
®
Burner has its own control knob.
Control Knobs
Typically, a pair of control knobs is located on the control
panel, directly in front of the pair of gas Star
®
burners they
control — with one gas Star
®
Burner positioned in front of
the other on the rangetop.
The symbol near each burner control knob identifies the
burner position on the range cooktop. The symbols shown
in Figure 10 are indicative of 48” range models.
Operation of the Burners
• Press in on the knob and turn it counter-clockwise to
the setting.
• The igniter for the selected burner sparks to ignite the
burner.
• After flame ignition, the igniter stops sparking.
• Rotate the knob to any flame setting between HI and
SIM.
• A blue light is positioned directly above each burner
control knob. The light turns on when the control knob
is rotated to an active mode. It is off when the control
knob is in the OFF position.
Figure 8: Star
®
Brass Burner Base
Figure 9: Standard Star
®
Burner Control Knob
Figure 10: Cooktop Symbols
Left Rear
Left Front
Center Rear
Center Front
Griddle
Right Rear
Right Front
XLO
XLO
XLO
XHI
XLO