ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 139)

ZyWALL 2 Series User’s Guide
Static Route Screens 9-3
Table 9-1 IP Static Route Summary
LABEL DESCRIPTION
Gateway This is the IP address of the gateway. The gateway is an immediate neighbor of your
ZyWALL that will forward the packet to the destination. On the LAN, the gateway must
be a router on the same segment as your ZyWALL; over the WAN, the gateway must
be the IP address of one of the remote nodes.
Edit Select the radio button next to a static route index number and then click Edit to set up
a static route on the ZyWALL.
Delete Select the radio button next to a static route index number and then click Delete to
remove a static route on the ZyWALL.
9.2.1 Configuring Route Entry
Select a static route index number and click Edit. The screen shown next appears. Fill in the required
information for each static route.
Figure 9-3 Edit IP Static Route
The following table describes the fields in this screen.
Table 9-2 Edit IP Static Route
LABEL DESCRIPTION
Route Name Enter the name of the IP static route. Leave this field blank to delete this static route.