ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 45)

ZyWALL 2 Series User’s Guide
Introducing the Web Configurator 2-7
Table 2-1 Web Configurator Screens Summary
LINK TAB FUNCTION
SNMP Use this screen to configure your ZyWALL’s settings for Simple
Network Management Protocol management.
DNS Use this screen to configure through which interface(s) and from
which IP address(es) users can send DNS queries to the ZyWALL.
Security Use this screen to set whether or not the ZyWALL responds to ICMP
pings and/or requests for unauthorized services.
UPnP Use this screen to enable UPnP on the ZyWALL. UPnP
Ports Use this screen to view the NAT port mapping rules that UPnP
creates on the ZyWALL.
View Log Use this screen to view the logs for the categories that you selected.
Log Settings Use this screen to change your ZyWALL’s log settings.
LOGS
Reports Use this screen to have the ZyWALL record and display the network
usage reports.
Status This screen contains administrative and system-related information.
Use this screen to access statistics.
DHCP Table This screen shows current DHCP Client information of all network
clients using the ZyWALL’s DHCP server.
F/W Upload Use this screen to upload firmware to your ZyWALL
Configuration Use this screen to backup and restore the configuration or reset the
factory defaults to your ZyWALL.
MAINTENANCE
Restart This screen allows you to reboot the ZyWALL without turning the
power off.
LOGOUT Click this label to exit the web configurator.