ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 224)

ZyWALL 2 Series User’s Guide
14-18 VPN Screens
Table 14-7 Basic IKE VPN Rule Edit
LABEL DESCRIPTION
Peer ID Type Select from the following when you set Authentication Method to Pre-shared Key.
Select IP to identify the remote IPSec router by its IP address.
Select DNS to identify the remote IPSec router by a domain name.
Select E-mail to identify the remote IPSec router by an e-mail address.
Select from the following when you set Authentication Method to Certificate.
Select IP to identify the remote IPSec router by the IP address in the subject
alternative name field of the certificate it uses for this VPN connection.
Select DNS to identify the remote IPSec router by the domain name in the
subject alternative name field of the certificate it uses for this VPN connection.
Select E-mail to identify the remote IPSec router by the e-mail address in the
subject alternative name field of the certificate it uses for this VPN connection.
Select Subject Name to identify the remote IPSec router by the subject name of
the certificate it uses for this VPN connection.
Select Any to have the ZyWALL not check the remote IPSec router's ID.