ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 359)

ZyWALL 2 Series User’s Guide
Introducing the SMT 21-3
Table 21-1 Main Menu Commands
OPERATION KEYSTROKES DESCRIPTION
Entering
information Fill in, or press
[SPACE BAR], then
press [ENTER] to
select from choices. You need to fill in two types of fields. The first requires you to type in
the appropriate information. The second allows you to cycle through
the available choices by pressing [SPACE BAR].
Required fields <? > All fields with the symbol <?> must be filled in order be able to save
the new configuration.
N/A fields <N/A> Some of the fields in the SMT will show a <N/A>. This symbol refers
to an option that is Not Applicable.
Save your
configuration [ENTER] Save your configuration by pressing [ENTER] at the message “Press
ENTER to confirm or ESC to cancel”. Saving the data on the screen
will take you, in most cases to the previous menu.
Exit the SMT Type 99, then press
[ENTER]. Type 99 at the main menu prompt and press [ENTER] to exit the
SMT interface.
21.3.1 Main Menu
After you enter the password, the SMT displays the ZyWALL Main Menu, as shown next.
Figure 21-3 Main Menu
The following table describes the fields in this screen.
Copyright (c) 1994 - 2003 ZyXEL Communications Corp.
ZyWALL 2 Main Menu
Getting Started Advanced Management
1. General Setup 21. Filter and Firewall Setup
2. WAN Setup 22. SNMP Configuration
3. LAN Setup 23. System Password
4. Internet Access Setup 24. System Maintenance
26. Schedule Setup
27. VPN/IPSec Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. NAT Setup
99. Exit
Enter Menu Selection Number: