ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 372)

ZyWALL 2 Series User’s Guide
23-6 WAN and Dial Backup Setup
Figure 23-4 Menu 11.1 Remote Node Profile (Backup ISP)
The following table describes the fields in this menu.
Table 23-5 Menu 11.1 Remote Node Profile (Backup ISP)
FIELD DESCRIPTION EXAMPLE
Rem Node
Name Enter a descriptive name for the remote node. This field can be up to
eight characters. LAoffice
Active Press [SPACE BAR] and then [ENTER] to select Yes to enable the
remote node or No to disable the remote node. Yes
Outgoing
My Login Enter the login name assigned by your ISP for this remote node. jim
My Password Enter the password assigned by your ISP for this remote node. *****
Retype to
Confirm
Enter your password again to make sure that you have entered is
correctly.
Authen This field sets the authentication protocol used for outgoing calls.
Options for this field are:
CHAP/PAP - Your ZyWALL will accept either CHAP or PAP when
requested by this remote node.
CHAP - accept CHAP only.
PAP - accept PAP only.
CHAP/PAP
Menu 11.1 - Remote Node Profile (Backup ISP)
Rem Node Name= ? Edit PPP Options= No
Active= Yes Rem IP Addr= ?
Edit IP= No
Outgoing: Edit Script Options= No
My Login=
My Password= ******** Telco Option:
Retype to Confirm= ******** Allocated Budget(min)= 0
Authen= CHAP/PAP Period(hr)= 0
Pri Phone #= ? Nailed-Up Connection= No
Sec Phone #=
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Press ENTER to Confirm or ESC to Cancel: