ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 71)

ZyWALL 2 Series User’s Guide
System 4-9
Table 4-5 Time Setting
LABEL DESCRIPTION
Time Server
Address Enter the address of your time server. Check with your ISP/network administrator if
you are unsure of this information (the default is tick.stdtime.gov.tw).
Synchronize Now Click this button to get the time and date from the time server you specified above.
Current Time This field displays the time of your ZyWALL.
Each time you reload this page, the ZyWALL synchronizes the time with the time
server.
New Time This field displays the last updated time from the time server.
When you select None in the Time Protocol field, enter the new time in this field
and then click Apply.
Current Date This field displays the date of your ZyWALL.
Each time you reload this page, the ZyWALL synchronizes the date with the time
server.
New Date This field displays the last updated date from the time server.
When you select None in the Time Protocol field, enter the new date in this field
and then click Apply.
Time Zone Choose the time setting of your location. This will set the time difference between
your time zone and Greenwich Mean Time (GMT).
Daylight Savings Select this option if you use daylight savings time. Daylight saving is a period from
late spring to early fall when many countries set their clocks ahead of normal local
time by one hour to give more daytime light in the evening.
Start Date Enter the month and day that your daylight-savings time starts on if you selected
Daylight Savings.
End Date Enter the month and day that your daylight-savings time ends on if you selected
Daylight Savings.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.