1 unix syslog – ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual
Page 464
ZyWALL 2 Series User’s Guide
32-6
System Information and Diagnosis
Figure 32-6 Menu 24.3: System Maintenance: Log and Trace
32.4.1 UNIX Syslog
The ZyWALL uses the UNIX syslog facility to log the CDR (Call Detail Record) and system messages to
a syslog server. Syslog and accounting can be configured in Menu 24.3.2 - System Maintenance - Unix
Syslog, as shown next.
Figure 32-7 Menu 24.3.2: System Maintenance: UNIX Syslog
You need to configure the UNIX syslog parameters described in the following table to activate syslog then
choose what you want to log.
Table 32-3 System Maintenance Menu Syslog Parameters
PARAMETER DESCRIPTION
Syslog:
Syslog logging sends a log to an external syslog server used to store logs.
Active Press [SPACE BAR] and then [ENTER] to turn syslog logging on or off.
Syslog Server IP
Address
Enter the server name or IP address of the syslog server that will log the selected
categories of logs.
Menu 24.3 - System Maintenance - Log and Trace
2. UNIX Syslog
4. Call-Triggering Packet
Press ENTER to Confirm or ESC to Cancel
Menu 24.3.2 - System Maintenance - Syslog Logging
Syslog:
Active= No
Syslog Server IP Address= 0.0.0.0
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel: