ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 285)

ZyWALL 2 Series User’s Guide
Authentication Server 16-5
Table 16-2 RADIUS
LABEL DESCRIPTION
Port Number The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator instructs you
to do so with additional information.
Key Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external authentication server and the access points.
The key is not sent over the network. This key must be the same on the external
authentication server and ZyWALL.
Accounting Server
Active Enable this feature to do user accounting through an external authentication
server.
Server Address Enter the IP address of the external accounting server in dotted decimal notation.
Port Number The default port of the RADIUS server for accounting is 1813.
You need not change this value unless your network administrator instructs you
to do so with additional information.
Key Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external accounting server and the access points.
The key is not sent over the network. This key must be the same on the external
accounting server and ZyWALL.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.