ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 490)

ZyWALL 2 User’s Guide
34-2 System Maintenance & Information
34.1.1 Command Syntax
The command keywords are in courier new font.
Enter the command keywords exactly as shown, do not abbreviate.
The required fields in a command are enclosed in angle brackets <>.
The optional fields in a command are enclosed in square brackets [].
The |symbol means “or”.
For example,
sys filter netbios config <type> <on|off>
means that you must specify the type of netbios filter and whether to turn it on or off.
34.1.2 Command Usage
A list of commands can be found by typing help or ? at the command prompt. Always type the full
command. Type exit to return to the SMT main menu when finished.
Figure 34-2 Valid Commands
The following table describes some commands in this screen.
Table 34-1 Valid Commands
COMMAND DESCRIPTION
sys The system commands display device information and configure device settings.
exit This command returns you to the SMT main menu.
Copyright (c) 1994 - 2003 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys exit device ether
poe pptp config radius
ip ipsec ppp certificates
cnm radius
ras>