ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 433)

ZyWALL 2 Series User’s Guide
NAT 28-19
Table 28-5 Menu 15.3: Trigger Port Setup
FIELD DESCRIPTION EXAMPLE
Rule This is the rule index number. 1
Name Enter a unique name for identification purposes. You may enter up to 15
characters in this field. All characters are permitted - including spaces. Real Audio
Incoming Incoming is a port (or a range of ports) that a server on the WAN uses when it sends out a
particular service. The ZyWALL forwards the traffic with this port (or range of ports) to the
client computer on the LAN that requested the service.
Start Port Enter a port number or the starting port number in a range of port numbers. 6970
End Port Enter a port number or the ending port number in a range of port numbers. 7170
Trigger The trigger port is a port (or a range of ports) that causes (or triggers) the ZyWALL to record
the IP address of the LAN computer that sent the traffic to a server on the WAN.
Start Port Enter a port number or the starting port number in a range of port numbers. 7070
End Port Enter a port number or the ending port number in a range of port numbers. 7070
Press [ENTER] at the message “Press ENTER to Confirm...” to save your configuration, or press [ESC] at
any time to cancel.