Navigating the smt interface, 3 navigating the smt interface, 2 entering the password – ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual
Page 358
ZyWALL 2 Series User’s Guide
21-2
Introducing the SMT
21.2.2 Entering the Password
The login screen appears after you press [ENTER], prompting you to enter the password, as shown below.
For your first login, enter the default password “1234”. As you type the password, the screen displays an “X”
for each character you type.
Please note that if there is no activity for longer than five minutes after you log in, your ZyWALL will
automatically log you out and display a blank screen. If you see a blank screen, press [ENTER] to bring up
the login screen again.
Figure 21-2 Password Screen
21.3 Navigating the SMT Interface
The SMT is an interface that you use to configure your ZyWALL.
Several operations that you should be familiar with before you attempt to modify the configuration are listed
in the table below.
Table 21-1 Main Menu Commands
OPERATION KEYSTROKES
DESCRIPTION
Move down to
another menu
[ENTER]
To move forward to a submenu, type in the number of the desired
submenu and press [ENTER].
Move up to a
previous menu
[ESC]
Press the [ESC] key to move back to the previous menu.
Move to a
“hidden” menu
Press [SPACE BAR]
to change No to Yes
then press [ENTER].
Fields beginning with “Edit” lead to hidden menus and have a default
setting of No. Press [SPACE BAR] to change No to Yes, and then
press [ENTER] to go to a “hidden” menu.
Move the cursor [ENTER] or
[UP]/[DOWN] arrow
keys
Within a menu, press [ENTER] to move to the next field. You can also
use the [UP]/[DOWN] arrow keys to move to the previous and the
next field, respectively.
Enter Password : XXXX