ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 504)

ZyWALL 2 Series User’s Guide
36-2 Call Scheduling
To set up a schedule set, select the schedule set you want to setup from menu 26 (1-12) and press [ENTER]
to see Menu 26.1 - Schedule Set Setup as shown next.
Figure 36-2 Schedule Set Setup
If a connection has been already established, your ZyWALL will not drop it. Once the connection is dropped
manually or it times out, then that remote node can't be triggered up until the end of the Duration.
Table 36-1 Schedule Set Setup
FIELD DESCRIPTION OPTIONS
Active Press [SPACE BAR] to select Yes or No. Choose Yes and press [ENTER]
to activate the schedule set. Yes
No
Start
Date Enter the start date when you wish the set to take effect in year -month-
date format. Valid dates are from the present to 2036-February-5.
How
Often Should this schedule set recur weekly or be used just once only? Press
[SPACE BAR] and then [ENTER] to select Once or Weekly. Both these
options are mutually exclusive. If Once is selected, then all weekday
settings are N/A. When Once is selected, the schedule rule deletes
automatically after the scheduled time elapses. Once
Weekly
Once:
Date If you selected Once in the How Often field above, then enter the date the
set should activate here in year-month-date format.
Weekday:
Menu 26.1 - Schedule Set Setup
Active= Yes
Start Date(yyyy/mm/dd) = 2000 – 01 - 01
How Often= Once
Once:
Date(yyyy/mm/dd)= 2000 – 01 - 01
Weekdays:
Sunday= N/A
Monday= N/A
Tuesday= N/A
Wednesday= N/A
Thursday= N/A
Friday= N/A
Saturday= N/A
Start Time (hh:mm)= 00 : 00
Duration (hh:mm)= 00 : 00
Action= Forced On
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle