ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 88)

ZyWALL 2 Series User’s Guide
6-4 WAN Screens
Figure 6-2 Ethernet Encapsulation
The following table describes the fields in this screen.
Table 6-4 Ethernet Encapsulation
LABEL DESCRIPTION
Encapsulation You must choose the Ethernet option when the WAN port is used as a regular
Ethernet.
Service Type Choose from Standard, Telstra (RoadRunner Telstra authentication method), RR-
Manager (Roadrunner Manager authentication method), RR-Toshiba (Roadrunner
Toshiba authentication method) or Telia Login.
The following fields do not appear with the Standard service type.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the user name above.
Retype to Confirm Type your password again to make sure that you have entered is correctly.
Login Server IP
Address Type the authentication server IP address here if your ISP gave you one.
Login Server
(Telia Login only) Type the domain name of the Telia login server, for example “login1.telia.com”.
Relogin
Every(min)
(Telia Login only) The Telia server logs the ZyWALL out if the ZyWALL does not log in periodically.
Type the number of minutes from 1 to 59 (30 default) for the ZyWALL to wait between
logins.
Apply Click Apply to save your changes back to the ZyWALL.