ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 603)

ZyWALL 2 Series User’s Guide
Log Descriptions O-17
Chart O-13 Log Categories and Available Settings
LOG CATEGORIES AVAILABLE PARAMETERS
attack 0, 1, 2, 3
error 0, 1, 2, 3
ike 0, 1, 2, 3
ipsec 0, 1, 2, 3
javablocked 0, 1, 2, 3
mten 0, 1
upnp 0, 1
urlblocked 0, 1, 2, 3
urlforward 0, 1
Use 0 to not record logs for that category, 1 to record only logs for that category, 2 to record only
alerts for that category, and 3 to record both logs and alerts for that category.
Use the sys logs save command to store the settings in the ZyWALL (you must do
this in order to record logs).
Displaying Logs
Use the sys logs display command to show all of the logs in the ZyWALL’s log.
Use the sys logs category display command to show the log settings for all of
the log categories.
Use the sys logs display [log category] command to show the logs in an
individual ZyWALL log category.
Use the sys logs clear command to erase all of the ZyWALL’s logs.
Log Command Example
This example shows how to set the ZyWALL to record the access logs and alerts and then
view the results.
ras> sys logs load
ras> sys logs category access 3
ras> sys logs save