ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 122)

Chapter 16 Port Security
VES-1616F-3x Series User’s Guide
122
The following table describes the labels in this screen.
Table 37 Port Security
LABEL DESCRIPTION
Active Select this check box to enable the port security feature on the switch.
Port This field displays a port number.
Active Select this check box to enable the port security feature on this port. The switch
forwards packets whose MAC address(es) is in the MAC address table on this port.
Packets with no matching MAC address(es) are dropped.
Clear this check box to disable the port security feature. The switch forwards all
packets on this port.
Address
Learning
MAC address learning reduces outgoing broadcast traffic. For MAC address
learning to occur on a port, the port itself must be active with address learning
enabled.
Limited Number
of Learned
MAC Address
Use this field to limit the number of (dynamic) MAC addresses that may be learned
on a port. For example, if you set this field to "5" on port 2, then only the devices with
these five learned MAC addresses may access port 2 at any one time. A sixth device
would have to wait until one of the five learned MAC addresses aged out. MAC
address aging out time can be set in the Switch Setup screen. The valid range is
from 0 to 16K. “0” means this feature is disabled, so the switch will learn MAC
addresses up to the global limit of 16K.
Apply Click Apply to save your changes back to the switch.
Cancel Click Cancel to begin configuring this screen afresh.