ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 222)

Chapter 32 Introducing the Commands
VES-1616F-3x Series User’s Guide
222
<profile-name> Displays settings of the specified
VDSL profile.
13
vdsl-psdprofile Displays a summary list of VDSL PSD
profiles.
13
<profile-name> Displays settings of the specified
VDSL PSD profile.
13
vlan Displays the status of all VLANs. 13
<vlan-id> Displays the status of the specified
VLAN.
13
vlan1q gvrp Displays GVRP settings. 13
port-isolation Displays VLAN-based port isolation
settings.
13
vlan-stacking Displays VLAN stacking settings. 13
ssh <1|2> <[user@]dest-
ip>
Connects to an SSH server with the
specified SSH version.
13
<command </>> Connects to an SSH server with the
specified SSH version and addition
commands to be executed on the
server.
13
traceroute <ip|host-name> Determines the path a packet takes to
a device.
13
[<vlan-id>][ttl
<1-255>] [wait
<1-60>] [queries
<1-10>]
Determines the path a packet takes to
a device in the specified VLAN.
13
vdsl <port-
list>
remote-reset Resets the connection information
and settings on the remote CPE
device(s).
13
remote-test Sets the port(s) to test the connection
to the remote CPE device(s).
13
reset Clears port statistics and connection
information. This re-initializes the
connection.
13
retrain Sets the port(s) to establish the
connection again.
13
write memory Saves current configuration to the
configuration file the switch is
currently using.
13
Table 80 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION P