ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 228)

Chapter 32 Introducing the Commands
VES-1616F-3x Series User’s Guide
228
ssh Disables SSH (Secure Shell)
server access to the switch.
13
telnet Disables telnet access to the
switch.
13
snmp-server trap-destination
<ip>
Disables sending of SNMP
traps to a station.
13
spanning-tree Disables (R)STP. 13
<port-list> Disables (R)STP on the
specified ports.
13
ssh key <rsa1|rsa|dsa> Disables the secure shell
server encryption key. Your
switch supports SSH versions
1 and 2 using RSA and DSA
authentication.
13
known-hosts Removes all remote hosts. 13
known-hosts <host-
ip>
Removes the specified remote
hosts from the list of all known
hosts.
13
known-hosts <host-
ip> [1024|ssh-
rsa|ssh-dsa]
Removes remote known hosts
with the specified public key
(1024-bit RSA1, RSA or DSA).
13
storm-control Disables broadcast storm
control.
13
syslog Disables syslog logging. 13
server <ip-
address>
Disables syslog logging to the
specified syslog server.
13
server <ip-
address> inactive
Enables syslog logging to the
specified syslog server.
13
type <type> DIsables syslog logging for the
specified log type ( sys ,
link , config , error or
report ).
13
timesync Removes the time server
protocol.
13
trunk <T1> Disables port group trunking. 13
interface <port-
list>
Removes ports from the trunk
group.
13
lacp Disables LACP in the trunk
group.
13
vdsl-alarmprofile <profile-name> Removes a VDSL alarm
profile. You cannot delete a
default profile (DEFVAL).
13
vdsl-profile <profile-name> Removes a VDSL profile. You
cannot delete a default profile
(DEFVAL).
13
vdsl-psd profile <profile-name> Removes a VDSL PSD profile.
You cannot delete a default
profile (DEFVAL).
13
Table 81 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION P